標題: Place a strip of tape [打印本頁] 作者: ticof48486@poke 時間: 2024-12-30 13:03 標題: Place a strip of tape
Fill any gaps with cushioning material to prevent movement during transport. Filling and sealing Clean and dry the box : any dirt or moisture will weaken the adhesive tape. Fill the box properly : Use bubble wrap, packing peanuts, or paper to fill any gaps. Close the flap : Fold the flap down neatly and prepare to stick it on. Proper Tape Application Technique Single-line method For lightweight packages, a single strip approach is usually sufficient: Place the package on a flat surface .
Place a strip of tape along the center seam where the job data flaps meet. Make sure the tape extends a few inches beyond the edge for extra security. H-type taping method For heavier packages, the H-taping method provides additional strength: Apply the tape along the center seam as you did with the single strip method . Add strips of tape along the edges of the box lid , forming an "H" shape. By covering all seams, you can ensure that the box is securely sealed and ready for shipping.
Common Mistakes to Avoid Even with the best intentions, common mistakes can cause packaging to fail: Using the wrong type of tape : Always match the tape to the weight of the package and the storage conditions. Apply freely : Make sure the tape is applied smoothly and evenly without bubbles. Over-taping or under-taping : Too much tape creates waste, while too little tape can result in a weak seal. Benefits of Buying Tape in Bulk Cost-effectiveness Purchasing tape in bulk can significantly reduce costs.